Dyno Results Testing New Pipe

From $1

    Table of contents
    No headers

    Results for dyno (true rear wheel, which is about 25% less than crank). With Vespa pipe and one custom built for Vespa KDX. Did not have correct jets to finish tuning so power and top rpm will be higher. We used wide band oxygen sensor and it worked a treat, we are running way lean so larger main jets are required.

    Red and Green runs are with powervalve set to low rpm power. We do gain some power but not enough to worry about.

    567.jpg

    Tags: (Edit tags)
    • No tags
    Comments (0)
    You must login to post a comment.

     
    Powered by MindTouch Core

    Disclaimer: Vespa Labs contains information that is VERY likely to wreck your scooter and possibly yourself both intentionally (i.e. gaining more peformance while sacrificing reliability + safety) and unintentionally (i.e. misleading or incorrect information). Vespa Labs is only a wiki and intended as a dumping ground for information and not as a properly reviewed source. The same disclaimers that wikipedia.org use apply to Vespa Labs. The short version is use information at your own risk, both information on the main wiki and in the user areas are intended to be used only as "thought provoking" for someone that knows what they are doing. If you try to implement a "thought" Vespa Labs is not reponsible and if something goes wrong we hope that you live and update the offending information with corrections to warn others.

    Vespa Labs is an international site and therefore may contain information that is not road legal in some countries/states and may also invalidate insurance policies. Treat all information as experimental and for "race use only" (i.e. not for road use - even if it is implied or explicitly stated). Refer to and adhere to your local road and legal rules, as well as the manufacturers recommendations.